|
|
|
|
|
|
| |
|
|
|
<![CDATA[<big id="shzch"><form id="shzch"></form></big>]]>
檢測認證人脈交流通訊錄
絕緣耐壓測試儀
- 主要規格：
- 7130/7132/7140/7142精確數位合成型耐壓/絕緣測試儀
- 7130/7132/7140/7142精確數位合成型耐壓/絕緣測試儀 技術參數
MODEL 7130 7132 7140 7142
AC WITHSTAND VOLTAGE
Output Rating 5KVAC/20mA
Range Resolution Accuracy
Output Voltage，KVAC 0-5.00 0.01 ±( 2% of setting +5V )
Output Frequency 50Hz/60Hz±100ppm，User Selection
Output Waveform Sine Wave，THD<2%( Resistion Load )，Crest Factor = 1.3-1.5
Output Regulation ±( 1% of output +5V )，Form no load full load
SETTINGS
Max-Limit AC Current，mA 0-20.00 0.01 ±( 2% of setting +2counts )
Min-Limit AC Current，mA 0-9.999 0.001 ±( 2% of setting +2counts )
Ramp Time，second 0-999.9 0.1 ±( 0.1% + 0.05sec )
Dwell Time，second 0，0.3-999.9 0.1
( 0=continuous )
Arc Detection 0，1-9 ranges ( 0=OFF，9 is the most sensitivity )
DC WITHSTAND VOLTAGE（7140，7142 ONLY）
Output Rating 6KVDC/7500uA
Output Voltage，KVDC 0-6.00 0.01 ±( 2% of setting +5V )
Output Ripple < 5% ( 6KV/7500uA at Resistive Load )
SETTINGS
Max-Limit DC Current，uA 0-7500 1 ±( 2% of setting +2counts )
Min-Limit DC Current，uA 0-999.9 0.1 ±( 2% of setting +2counts )
Ramp Time，second 0.1-999.9 0.1 ±( 0.1% + 0.05sec )
Dwell Time，second 0，0.4-999.9 0.1
( 0=continuous )
Arc Detection 0，1-9 ranges ( 0=OFF，9 is the most sensitivity )
Discharge Time ≦200msec
MODEL 7130 7132 7140 7142
INSULATION RESISTANCE ( 7132，7142 ONLY )
Output Rating 1KVDC/9999MW
Output Voltage，VDC 30-1000 10 ±( 2% of setting +3V )
SETTINGS
Max-Limit Resistance，MW 0，1-9999（0=OFF ) 1 ±(2% of setting +2counts) at 500-1000VDC，1-1000M
Min-Limit Resistance，MW 1-9999 1 ±(5% of setting +2counts) at 500-1000VDC,1000-9999M
±(8% of setting +2counts) at 30-500VDC,1-1000M
Ramp Time，second 0.1-999.9 0.1 ± ( 0.1% + 0.05sec )
Dwell Time，second 0，1.0-999.9 0.1
Delay Time，second 0，0.5-999.9 0.1
( 0=continuous )
GENERAL
Input Voltage AC 115/230VAC±15%，50/60Hz±5%，Fuse 3.15A Fast
PLC Remote Control Input: Test，Reset，Memory1.2.3，Interlock
Output: Pass，Fail，Processing
Interface( Option ) RS485 Interface
Memory 10memories，3 steps/Memory
Display 128×64 Graphic LCD
Safety Built-in Smart GFI trip current 450uA max，HV shut dowm speed : <1mS
Key Lock To prevent unauthorized alteration of test parameters
Calibration Build-in software and external calibrated meters
Verification Build-in software driven verification menu to test fault detection circuits
Alarm Volume Setting Range : 0-9;0=OFF，1 is softest volume，9 is loudest volume
Environment 0-40℃，20-80%RH
Dimension/Net Weight 215mm(W)×89mm(H)×370mm(D)/10Kg
※Ordering Information※------------------------------------------------------------------------------------
7130 AC Withstand Voltage Tester
7132 AC Withstand Voltage / Insulation Resistance Tester
7140 AC/DC Withstand Voltage Tester
7142 AC/DC Withstand Voltage / Insulation Resistance Tester
