檢測認證人脈交流通訊錄
- 詳情描述
The Agilent E4416/17A EPM-P Series power meters provide peak, average, peak-to-average ratio and time-gated measurements, using the E9320 peak and average power sensors. The E4416/17A are compatible with all 8480 and E-series power sensors.
The E4416A is a single-channel power meter.
The E4417A is a true dual-channel power meter, which means that you get two simultaneous power readings on the display.
The E4416/17A do not have legacy power meter code compatibility because they are targeted at new applications such as time-gated power measurements. Code compatibility is however provided by the EPM Series power meters (E4418B and E4419B) as they are a direct replacement for the 436A, 437B and 438A.
Simultaneous peak, average and peak-to-average ratio power measurements
Time-gated power measurements
Up to 1,000 corrected readings per second over the GPIB
20 Msamples per second sampling rate for reliable continuous and single shot measurements on wide bandwidth signals
Compatible with all 8480 and E-Series power sensors
Easy-to-read display - large 1-line or 4-line numeric display, or trace display, or an analog display
8 pre-defined wireless configurations (GSM, EDGE, NADC, iDEN, Bluetooth, IS-95 CDMA, W-CDMA and cdma2000)
The Agilent E4418/19B are low-cost, high-performance, programmable RF power meters. They are fully compatible with the 8480 series and the E-Series power sensors (except the E9320A family). Depending upon which sensor is used, the E4418/19B can measure from -70 dBm to +44 dBm at frequencies from 9 kHz to 110 GHz.
Designed for bench and ATE use, the E4418/19B makes fast (up to 100 readings per second with E-series sensors), accurate and repeatable power measurements.
The E4418B is a single-channel power meter.
The E4419B is a true dual-channel power meter, which means that you get two simultaneous power readings on the display.
Fast measurement speed (up to 100 readings per second, over the GPIB, with E-Series sensors)
Speed improvement of x2 using the 8480-Series power sensor (compared to the 437B)
No range-switching delays with 8480 series sensors, and only one fast-range switching point with E-Series sensors
RS-232/422 Interfaces as standard
GPIB Interface for remote control of all functions
Code compatibility with HP 436A/437B (E4418B) and 438A (E4419B)
中賽儀器庫存大量各種高頻二手機現貨特新機特價出售中一本公司長期現金回收各種高頻二手儀器
